Paper feed unit
1. Leading edge paper feeding: red rubber on the back of the timing belt, each belt can be adjusted synchronously or separately to adjust the height, compensation belt
Wear and tear.
2. Paper suction negative pressure: frequency conversion without section pressure, VR operation.
3. The cardboard has been slotted to ensure that the cardboard is fed in parallel, and the suction port is based on the condition of the cardboard, and the suction opening of each belt is
It can be turned on or off manually.
4. Extended paper feeding function: the friction coefficient is lower or the longer cardboard can be sent smoothly, and the setting is operated by the screen.
5. Paper cassette: rubber wheel (wear rubber)
Embossing wheel (chrome plated)
After the axle body is welded, stress relief is performed to avoid deformation and bending; static balance correction is avoided.
The operation produces vibration.
Cardboard gap (high, low) is manually adjusted with scribes.
6. Leading edge paper timing belt and paper feed rubber wheel set line speed synchronization; even belt wear and rubber wheel line speed can
Synchronize to avoid the speed difference caused by the skew of the cardboard feed or the abnormal wear of the rubber wheel.
7. Front baffle: paper exit gap, left and right adjustment mode - manual scribe.
8. Side baffle: move left and right, positioning is automatically adjusted by order setting, with button electric fine adjustment and limit switch
protection.
9. The left side baffle (operating side) is equipped with a pneumatic side shooting function, the stroke is 110MM, and the side beat frequency is freely set by the screen.
10. Backsplash: Move back and forth, positioning is automatically adjusted by order setting, with button electric fine adjustment and limit switch
protection. Longer cardboard adds auxiliary roller support.
11. Feeder main drive motor frequency conversion without step speed regulation, VR operation.
QR Code